TEM support grids

Standard grade TEM support grids are available in copper, nickel or gold, or in copper with one side flash coated with palladium for identification purposes. All grids are available in 3.05mm diameter and some in 2.3mm diameter. All Agar grids are packed in tubes of 100, unless otherwise specified. A comprehensive table of grid parameters is available on request.

Extensive range of grids for TEM applications
Square, hexagonal, rectangular, parallel, slot & round mesh shapes
Finder & folding grids
50, 75, 150, 200, 300, 400, 600, 700, 1000, 1500 & 2000 mesh
Copper, nickel, gold, gilded & platinised
Special metals: aluminium, molybdenum, stainless steel & titanium

Square Mesh Rectangular Mesh Parallel Bar Folding Hexagonal Mesh Thin Bar Very Fine Mesh Single & Triple Slot Single Hole Tabbed

LOAD PREVIOUS PRODUCTS

Square Pattern, 200 Mesh, Tabbed TEM Support Grids
Tabbed grids offer easier handling and help to avoid contamination, allowing grids to be held securely for spraying, rinsing and drying.Square pattern, 200 mesh. Copper, Nickel or Gold.
Average lead time: 12 to 28 days
From £24.81
Average lead time: 12 to 28 days
Square Pattern, 300 Mesh, Tabbed TEM Support Grids
Tabbed grids offer easier handling and help to avoid contamination, allowing grids to be held securely for spraying, rinsing and drying.Square pattern, 300 mesh. Copper, Nickel or Gold.
Average lead time: 12 to 19 days
From £24.81
Average lead time: 12 to 19 days
Square Pattern, 400 Mesh, Tabbed TEM Support Grids
Tabbed grids offer easier handling and help to avoid contamination, allowing grids to be held securely for spraying, rinsing and drying.Square pattern, 400 mesh. Copper, Nickel or Gold.
Average lead time: 12 days
From £26.56
Average lead time: 12 days
Square Pattern, 500 Mesh, Tabbed TEM Support Grids
Tabbed grids offer easier handling and help to avoid contamination, allowing grids to be held securely for spraying, rinsing and drying. Square pattern, 500 mesh. Copper or Nickel.
Average lead time: 12 to 19 days
From £29.85
Average lead time: 12 to 19 days
Slotted Pattern, 300x75 Mesh, Tabbed TEM Support Grids
Tabbed grids offer easier handling and help to avoid contamination, allowing grids to be held securely for spraying, rinsing and drying. Slotted pattern, 300 x 75 mesh. Copper or Nickel.
Average lead time: 19 to 43 days
From £24.81
Average lead time: 19 to 43 days
Slot Grid, 2 x 1mm, Tabbed TEM Support Grids
Tabbed grids offer easier handling and help to avoid contamination, allowing grids to be held securely for spraying, rinsing and drying. Slot size is 2mm x 0.98mm. Copper, Nickel or Gold.
Average lead time: 19 to 28 days
From £27.58
Average lead time: 19 to 28 days
Triple Slot TEM Support Grid
This slot grid provides increased support by way of two strengthening bars enabling thinner support films to be used. Copper, Cu/Pd, Nickel or Gold.
Average lead time: 1 to 12 days
From £29.61
Average lead time: 1 to 12 days
Hexagonal Pattern 100 Mesh TEM Support Grids
Hexagonal pattern, 100 mesh grids offer an alternative to the standard square mesh pattern, providing maximum support for any given mesh repeat distance. Copper, Nickel or Gold.
Average lead time: 12 days
From £20.31
Average lead time: 12 days
SALE
600um Hole TEM Support Grids
Single 600μm hole TEM support grids. 3.05mm diameter. Available in Copper, Copper/Palladium, Nickel & Gold. Special prices valid while stocks last.
Average lead time: 1 to 12 days
From £18.98
Average lead time: 1 to 12 days