TEM support grids

Standard grade TEM support grids are available in copper, nickel or gold, or in copper with one side flash coated with palladium for identification purposes. All grids are available in 3.05mm diameter and some in 2.3mm diameter. All Agar grids are packed in tubes of 100, unless otherwise specified. A comprehensive table of grid parameters is available on request.

Extensive range of grids for TEM applications
Square, hexagonal, rectangular, parallel, slot & round mesh shapes
Finder & folding grids
50, 75, 150, 200, 300, 400, 600, 700, 1000, 1500 & 2000 mesh
Copper, nickel, gold, gilded & platinised
Special metals: aluminium, molybdenum, stainless steel & titanium

Square Mesh Rectangular Mesh Parallel Bar Folding Hexagonal Mesh Thin Bar Very Fine Mesh Single & Triple Slot Single Hole Tabbed

Thin Bar, High Transmission 200 Mesh TEM Support Grids
200 mesh thin bar grids are designed to give the highest transmission to maximise the viewable area of the specimen. Copper or Gold.
Average lead time: 1 to 12 days
From £36.47
Average lead time: 1 to 12 days
Thin Bar, Hex 200 Mesh TEM Support Grids
200 mesh thin bar grids are designed to give the highest transmission to maximise the viewable area of the specimen. Copper, Nickel or Gold.
Average lead time: 1 to 12 days
From £36.47
Average lead time: 1 to 12 days