Holey carbon films - CopperHoley carbon films have many uses in microscopy but for certain applications the mesh sizes of standard TEM grids are too large to support the sample.Average lead time: 25 daysFrom £72.58
Average lead time: 25 days- Holey carbon films - NickelHoley carbon films have many uses in microscopy but for certain applications the mesh sizes of standard TEM grids are too large to support the sample. Nickel. Special prices valid while stocks last.Average lead time: 1 to 25 days
From £90.70
Average lead time: 1 to 25 days 
Holey Carbon Films - GoldHoley carbon films have many uses in microscopy but for certain applications the mesh sizes of standard TEM grids are too large to support the sample.Average lead time: 25 daysFrom £99.83
Average lead time: 25 days
Lacey carbon films on Copper TEM GridsLacey carbon films are similar to the holey carbon films in that they have open areas but because of the fine lacey mesh structure they offer a greater percentage of open area in comparison.Average lead time: 1 to 25 daysFrom £73.73
Average lead time: 1 to 25 days
Lacey Carbon Films on Nickel TEM GridsLacey carbon films are similar to the holey carbon films in that they have open areas but because of the fine lacey mesh structure they offer a greater percentage of open area in comparison.Average lead time: 1 to 25 daysFrom £74.52
Average lead time: 1 to 25 days
Lacey carbon films on Gold TEM GridsLacey carbon films are similar to the holey carbon films in that they have open areas but because of the fine lacey mesh structure they offer a greater percentage of open area in comparison.Average lead time: 25 daysFrom £102.87
Average lead time: 25 days
Graphene Oxide Support FilmsGraphene oxide (GO) provides a thinner support film of higher mechanical strength, electrical and thermal conductivity compared to support films made from other materials. Agar GO support films are available on lacey carbon grids and Quantifoils.Average lead time: 1 to 87 daysFrom £137.32
Average lead time: 1 to 87 days
Carbon films on Copper GridsThis range of carbon films has been prepared to provide a very convenient, ready-to-use specimen support.Average lead time: 1 to 52 daysFrom £50.82
Average lead time: 1 to 52 days
Carbon films on Nickel GridsThis range of carbon films has been prepared to provide a very convenient, ready-to-use specimen support.Average lead time: 1 to 52 daysFrom £65.69
Average lead time: 1 to 52 days- Carbon Films on Gold GridsThis range of carbon films has been prepared to provide a very convenient, ready-to-use specimen support. Special prices valid while stocks last.Average lead time: 1 to 52 days
From £81.31
Average lead time: 1 to 52 days 
Formvar Carbon Films on CopperThin cast films of Formvar strengthened with the addition of a layer of evaporated carbon on copper grids.Average lead time: 1 to 25 daysFrom £66.50
Average lead time: 1 to 25 days- Formvar carbon films on NickelThin cast films of Formvar have been strengthened with the addition of a layer of evaporated carbon on nickel grids. Special prices valid while stocks last.Average lead time: 1 to 25 days
From £79.67
Average lead time: 1 to 25 days - Formvar Carbon Films on GoldThin cast films of Formvar strengthened with the addition of a layer of evaporated carbon on gold grids. Special prices valid while stocks last.Average lead time: 1 to 25 days
From £48.25
Average lead time: 1 to 25 days 
Formvar films - CopperFormvar coated grids without a carbon layer are suitable for TEM applications up to 100kV. Copper (cu)Average lead time: 1 to 117 daysFrom £48.29
Average lead time: 1 to 117 days- Formvar films - NickelFormvar coated grids without a carbon layer are suitable for TEM applications up to 100kV. NickelAverage lead time: 1 to 117 days
From £53.17
Average lead time: 1 to 117 days - Formvar Films - GoldFormvar coated grids without a carbon layer are suitable for TEM applications up to 100kV. Gold. Special prices valid while stocks last.Average lead time: 1 to 25 days
From £23.79
Average lead time: 1 to 25 days 
Pioloform films - CopperPioloform coated grids without a carbon layer are suitable for TEM applications up to 100kV. CopperAverage lead time: 1 to 42 daysFrom £60.05
Average lead time: 1 to 42 days- Pioloform films - NickelPioloform coated grids without a carbon layer are suitable for TEM applications up to 100kV. NickelAverage lead time: 25 to 42 days
From £56.58
Average lead time: 25 to 42 days - Pioloform films - GoldPioloform coated grids without a carbon layer are suitable for TEM applications up to 100kV. GoldAverage lead time: 4 to 42 days
From £61.32
Average lead time: 4 to 42 days - Silicon monoxide on lacey Formvar, 300 Mesh AGS185-3Silicon monoxide films are also available with a stabilised lacey Formvar film (this does not have a removable thin Formvar backing).Average lead time: 18 days£187.80Average lead time: 18 days
- Silicon monoxide on removable FormvarSilicon monoxide support films are resilient and able to withstand vigorous specimen preparation techniquesAverage lead time: 11 to 18 days
From £99.23
Average lead time: 11 to 18 days 
Quantifoil R3.5/1 holey carbon films - CircularCircular hole, size 3.5µm dia, separation 1µm, pitch 4.5µm. Special prices valid while stocks last.Average lead time: 1 to 177 daysPOA
Average lead time: 1 to 177 days- Quantifoil R1/4 holey carbon films - CircularCircular, hole size 1µm dia, separation 4µm. Special prices valid while stocks last.Average lead time: 87 to 177 days
POA
Average lead time: 87 to 177 days 
Quantifoil R2/1 holey carbon films - CircularCircular hole, size 2µm dia, separation 1µm, pitch 3µm.Average lead time: 1 to 197 daysPOA
Average lead time: 1 to 197 days
