Menu
ORDER ONLINE - no minimum order value
AGENTS & DISTRIBUTORS - available worldwide
REQUEST QUOTES - fast online pricing

Agar Scientific specialises in offering and producing a wide range of specimens specifically for TEM calibration where quantification or high resolution results are required. We endeavour to maintain the highest possible preparation standards in their production and where possible, we offer specimens that are certified. Agar Scientific calibration specimens for TEM are renown worldwide for their quality and reliability and each one is checked in an electron microscope. Specimens are rejected for exceeding 5% broken grid squares, for excessive dirt, or for inadequate image quality. These criteria govern every Agar calibration specimen. All specimens are prepared on standard 3.05mm copper grids.

Filters

16 products available

You've viewed 16 of 16 products

  1. Fine mesh
    This is available in copper, nickel or gold, in 1000, 1500 and 2000 mesh (1000, 1500 or 2000 repeat distance per inch), ie. 25, 18.75 and 12.5µm. Special prices valid while stocks last. 
    Average lead time: 1 to 21 days

    From £4.38

    Average lead time: 1 to 21 days
  2. Diffraction Grating Replicas
    Shadow cast carbon replicas of diffraction line gratings.
    Average lead time: 1 to 23 days

    From £37.64

    Average lead time: 1 to 23 days
  3. Mag*I*Cal calibration standard AGS1936
    Using this standard, the three major instrument calibrations: magnification, camera constant for indexing diffraction patterns and image/diffraction pattern rotation, can all be carried out using a single specimen.
    In Stock
    £1,427.66
    In Stock
    Down
    Up
  4. agar-scientific
    Perforated Carbon Film, 3.05mm grid AGS100
    This specimen is one of the quickest and easiest to use for performance checks since it gives information about nearly all causes of loss of resolution. Special prices valid while stocks last. 
    In Stock
    Special Price £4.00 was £25.90 You save: £26.28 (85%)
    In Stock
    Down
    Up
  5. High Resolution Test Specimen - Gold Particles on Carbon Film AGS132
    An arrangement of finely dispersed thin gold particles has an advantage over single crystal gold foil for tests of high resolution imaging capabilities in TEM.
    In Stock
    £53.63
    In Stock
    Down
    Up
  6. Ferritin, 3.05mm grid AGS126
    Ferritin molecules display a quad structure with a separation of 1.25 nm, which is useful as a resolution check.
    In Stock
    £21.43
    In Stock
    Down
    Up
  7. Evaporated platinum / iridium, 3.05mm grid AGS114
    The evaporated platinum/iridium specimen is supplied on a perforated carbon support film that provides holes for ease of focus and astigmatism correction.
    In Stock
    £19.65
    In Stock
    Down
    Up
  8. Combined test specimen, 3.05mm grid AGS142
    A perforated carbon film is shadowed with gold and graphitised carbon particles are deposited.
    Average lead time: 21 days
    £47.16
    Average lead time: 21 days
    Down
    Up
  9. Standard for HVEM AGS155
    Normal resolution test specimens are difficult to see on the viewing screen because of low contrast.
    In Stock
    £26.78
    In Stock
    Down
    Up
  10. Camera Length Calibration Specimens
    The very small crystallite size of these evaporated films of Aluminium makes them ideal for calibrating the camera length of an Electron Microscope.
    Average lead time: 1 day

    From £18.87

    Average lead time: 1 day
  11. Image Rotation Molybdenum Trioxide Crystals AGS112
    Molybdenum trioxide crystals
    In Stock
    £22.89
    In Stock
    Down
    Up
  12. Polystyrene latex particles
    Shadowed latex particles provide dense markers and small metal aggregates may be found at the edges of the metal shadowing for particle separation resolution checks.
    Average lead time: 1 to 21 days

    From £35.57

    Average lead time: 1 to 21 days
  13. Polystyrene Latex Particles
    This range of polystyrene particles is excellent for SEM calibration purposes.
    Average lead time: 1 to 21 days

    From £21.43

    Average lead time: 1 to 21 days
  14. Polystyrene latex spheres
    This range of polystyrene latex spheres can be used for either SEM or TEM applications.
    Average lead time: 1 to 23 days

    From £23.86

    Average lead time: 1 to 23 days
  15. Gold shadowed latex particles AGS128B
    These are latex particles of 0.196µm diameter shadowed with a fairly heavy coating of gold.
    In Stock
    £31.31
    In Stock
    Down
    Up
  16. Nanosphere Size Standards
    Highly uniform polystyrene spheres with a density of 1.05g/cm3 and refractive index of 1.59 @ 589nm wavelength. Special prices valid while stocks last. 
    Average lead time: 1 to 38 days

    From £357.00

    Average lead time: 1 to 38 days
Filters

16 products available

You've viewed 16 of 16 products

PRICE & AVAILABILITY: Please note that while we are working closely with our suppliers to minimise any global supply chain issues, prices and availability may be subject to change at short notice.
FILTERS
VIEW PRODUCTS Cancel