
Flat Embedding Moulds
FDA grade silicone rubber flat embedding moulds with a choice of cavities.
FDA grade silicone rubber flat embedding moulds with a choice of cavities.
FDA grade silicone rubber flat embedding moulds with a choice of cavities.
Withstands temperatures between -60°C and +218°C.
Under hot temperatures, the silicone retains its shape and integrity without any heat-related deformation. The silicon does not crack, harden, peel, crumble, dry out, rot or become brittle over time.
AGG3549 | Blue silicone rubber mould with 21 numbered cavities with double pre-trimmed ends. Mould size: 72 x 62 x 6mm. Cavity size (overall): 14 x 5 x 3mm. |
AGG3530 | Blue silicone rubber mould with 15 unmarked 11 x 6 x 5mm cavities. One end will produce trapezoidal-shaped tips for easy trimming. |
AGG3531-1 | Blue silicone rubber mould with 20 numbered 14 x 4.6 x 4mm cavities with trapezoidal-shaped tip at one ends. Number of cavities: 20. Numbering: 1-20. Mould size: 89 x 76 x 7mm. |
AGG3532 | Blue silicone rubber mould with 24 numbered cavities of the same block size as AGG3531-1 and contains three special cavities for multiple specimen embedding. |
AGG3533 | Blue silicone rubber mould with 20 unmarked rectangular 12 x 6 x 4mm cavities, with trapezoidal-shaped tip at one end. Eight rectangular compartments are also included. |
Please note these moulds are not suitable for use with silicone resins.
LEAD TIMES: Average Lead Times are shown individually in days for any products not currently in stock. Whilst we are working closely with our suppliers to minimise the impact of global supply chain issues, and regularly update our product prices and lead times, some are subject to change due to supply chain fluctuations.
Delivery is calculated at the checkout, please see our delivery and returns page for more information.