Agar Scientific supply and stock a comprehensive range of SEM specimen stubs for a wide range of instruments including: Amray, Cambridge Analysis, Cambridge, Deben, FEI-ESEM, Hitachi, ISI/ABT/Topcon, JEOL, LEO/Cambridge, FEI/Philips, Camscan, TESCAN, Zeiss and LEO/Zeiss. In addition to standard pin stubs other shapes include: angled stubs, cylinder stubs, low profile pin stubs and M4 threaded stubs. The majority of stubs are machined from free cutting aluminium with some also available in high purity aluminium, brass, carbon or copper.
45˚ SEM Mount 12.7mm Aluminum, grooved edge AG1610145˚ SEM Mount Ø12.7mm for FEI, Tescan, Zeiss (also for Philips, Leo, Cambridge, AMRAY, Leica, CamScan, ETEC) SEM's.Average lead time: 19 days£44.23Average lead time: 19 days
Thin section single holder M4 thread - Hitachi AG15431-4SEMClip Geological Thin Section Holders.In Stock£318.24In Stock
Small Set Screw Vice, M4, Ø15 x 12mm H, M4 AG16335Small set screw vice with an open slot of 4mm (0.157") wide and 5mm (0.197") deep.Average lead time: 28 days£39.50Average lead time: 28 days
Double Slotted Set Screw Vise, M4, Ø15 x 6mm AG16341Double slotted set screw vice with 2 ea. 1mm wide x 3mm deep slots to clamp thin specimens or cross sections.Average lead time: 12 days£38.58Average lead time: 12 days
Multi Holder for 6 Pin Stubs, M4 AG15411Multi holder accommodates up to six standard 12.7mm pin stubs.Average lead time: 12 days£135.05Average lead time: 12 days
Multi Holder for 12 Pin Stubs, M4 AG15417Multi holder accommodates up to 12 standard 12.7mm pin stubs.Average lead time: 12 days£180.08Average lead time: 12 days
Metallographic Mount Holder, 40mm, M4 AG15405Specimen holder for 40mm metallographic mounts.In Stock£122.45In Stock- Bulk Specimen Holder, M4 AG15308-4Bulk specimen holder holds irregular and round specimens up to a diameter of 32mm. Special prices valid while stocks last.In StockSpecial Price £84.60 was £139.16 You save: £65.47 (39%)In Stock
Large Bulk Specimen Holder, M4 AG15321-4Opening is 32mm (1 1/4") wide x 32mm (1 1/4") long x 13mm (1/2") deep.Average lead time: 12 days£169.45Average lead time: 12 days
Specimen Mount, M4, Ø50 x 6mm AG16328SEM Cylinder Specimen Mount for Hitachi SEM's with M4 thread. 50mm diameter.In Stock£10.13In Stock
SEM Pin Stub 25.4mm diameter, Pk10 AG16144SEM Pin Stub 25.4mm diameter with 9.5mm pin height.In Stock£34.98In Stock
SEM Pin Stub 32mm diameter, pack of 10 AG16148SEM Pin Stub 32mm diameter with 9.5mm pin height. Pack of 10.Average lead time: 19 days£39.38Average lead time: 19 days
Thin Specimen Split Mount Holder, M4 AG15335-4Simple but effective design to hold wafers and thin samples up to 3.2mm (1/8").Average lead time: 8 days£42.33Average lead time: 8 days
SEM cylinder mounts with engraved & numbered divisions for...SEM mounts for Hitachi SEMs with engraved and numbered divisions to accommodate multiple smaller samples.Average lead time: 19 daysFrom £12.00
Average lead time: 19 days
SEM pin mounts with engraved & numbered divisionsSEM pin mounts with engraved & numbered divisions for FEI/Philips, ZEISS/LEO, Cambridge, Leica, Amray, Tescan & Camscan SEMs.Average lead time: 19 to 28 daysFrom £8.61
Average lead time: 19 to 28 days
Hitachi SEM Cylinder Specimen MountsCylinder specimen mount for Hitachi TM3030/TM3000/TM1000 Tabletop SEM's. 15mm, 25mm and 35mm diameter.Average lead time: 1 to 28 daysFrom £18.85
Average lead time: 1 to 28 days
Average lead time: 12 days
