Agar Scientific supply and stock a comprehensive range of SEM specimen stubs for a wide range of instruments including: Amray, Cambridge Analysis, Cambridge, Deben, FEI-ESEM, Hitachi, ISI/ABT/Topcon, JEOL, LEO/Cambridge, FEI/Philips, Camscan, TESCAN, Zeiss and LEO/Zeiss. In addition to standard pin stubs other shapes include: angled stubs, cylinder stubs, low profile pin stubs and M4 threaded stubs. The majority of stubs are machined from free cutting aluminium with some also available in high purity aluminium, brass, carbon or copper.
SEMClip Specimen Mounts, Cylinder mounts with M4 Thread, 15mmCylinder mount SEMClips for Hitachi SEMs, with M4 thread. 15mm diameter.Average lead time: 26 daysFrom £33.28
Average lead time: 26 days
SEMClip Specimen Mounts, Cylinder mounts with M4 Thread, 25mm, AngledCylinder mount SEMClips for Hitachi SEMs, with M4 thread. Angled available in 25mm.Average lead time: 1 to 12 daysFrom £59.94
Average lead time: 1 to 12 days
SEMClip Specimen Mounts, Cylinder mounts with M4 Thread, 25mmCylinder mount SEMClips for Hitachi SEMs, with M4 thread.Average lead time: 1 to 12 daysFrom £36.07
Average lead time: 1 to 12 days- SEMClip Specimen Mounts, Cylinder mounts with M4 Thread, 32mmCylinder mount SEMClips for Hitachi SEMs, with M4 thread.Average lead time: 12 to 33 days
From £34.91
Average lead time: 12 to 33 days 
Thin section single holder M4 thread - Hitachi AG15431-4SEMClip Geological Thin Section Holders.In Stock£318.24In Stock
Double Slotted Set Screw Vise, M4, Ø15 x 6mm AG16341Double slotted set screw vice with 2 ea. 1mm wide x 3mm deep slots to clamp thin specimens or cross sections.Average lead time: 12 days£38.58Average lead time: 12 days
Metallographic Mount Holder, 40mm, M4 AG15405Specimen holder for 40mm metallographic mounts.In Stock£122.45In Stock- Bulk Specimen Holder, M4 AG15308-4Bulk specimen holder holds irregular and round specimens up to a diameter of 32mm. Special prices valid while stocks last.In StockSpecial Price £84.60 was £139.16 You save: £65.47 (39%)In Stock
Large Bulk Specimen Holder, M4 AG15321-4Opening is 32mm (1 1/4") wide x 32mm (1 1/4") long x 13mm (1/2") deep.Average lead time: 12 days£169.45Average lead time: 12 days
Specimen Mount, M4, Ø50 x 6mm AG16328SEM Cylinder Specimen Mount for Hitachi SEM's with M4 thread. 50mm diameter.In Stock£10.13In Stock
Thin Specimen Split Mount Holder, M4 AG15335-4Simple but effective design to hold wafers and thin samples up to 3.2mm (1/8").Average lead time: 8 days£42.33Average lead time: 8 days
SEM cylinder mounts with engraved & numbered divisions for...SEM mounts for Hitachi SEMs with engraved and numbered divisions to accommodate multiple smaller samples.Average lead time: 19 daysFrom £12.00
Average lead time: 19 days
