High Precision Pin Vise Handle and Precision Ground Diamond ScribesHigh precision pin vise handle machined from the finest materials.Average lead time: 22 daysFrom £25.91
Average lead time: 22 days
EPO-TEK H70E Epoxy AG16017EPO-TEK® H70E Thermally Conductive Epoxy.Average lead time: 22 days£139.91Average lead time: 22 days
Copper foil on aluminium grid AGS149This dual-purpose specimen determines detector efficiency, generating two well separated K lines to check the calibration of the X-ray detector.Call for leadtime£32.20Call for leadtime
Tantalum AperturesTantalum final apertures are for SEM use where X-ray analysis of biological material is being undertaken.Average lead time: 62 daysFrom £70.04
Average lead time: 62 days
Stainless Steel DiscsThese stainless steel discs have etched holes and are mainly used for gas flow control, pressure testing and filtering of particles.Call for leadtimeFrom £339.66
Call for leadtime
Spray apertures, 12.68 x 0.25mm, Molybdenum12.68mm dia, 0.25mm thick. Profile A. Used in Cambridge/LEO/Zeiss and Camscan scanning electron microscopes.Average lead time: 62 daysFrom £125.21
Average lead time: 62 days
Apertures with square holes - 2mm dia, 0.6mm thickApertures with square holes manufactured from platinum.Average lead time: 37 daysPOA
Average lead time: 37 days
Apertures with square holes - 3.04mm dia, 0.25mm thickApertures with square holes manufactured from platinum.Average lead time: 62 daysFrom £375.81
Average lead time: 62 days- Cryo-ApronsCryo-Aprons offer protection from splashes and ultra-cold applications.Average lead time: 6 days
From £290.40
Average lead time: 6 days 
AFM Disc GripperThis AFM disc gripper has been specially designed with rubber coated tips for picking up discs from a flat surface.Average lead time: 1 dayFrom £15.62
Average lead time: 1 day
Sable hair brushesSable hair brushes for delicate manoeuvring of specimens and grids.Average lead time: 1 dayFrom £29.88
Average lead time: 1 day
Acheson Silver DAG 1415MThe genuine replacement for DAG 915, used widely in electron microscopy and electronic circuitry for capacitor terminations, electrostatic screening, coating of UHF reflectors and electroplating on non-conductors.Average lead time: 1 dayFrom £16.44
Average lead time: 1 day
Average lead time: 6 days
Insect PinsInsect pins: 0.2 x 12mm, 0.1 x 12mm, 0.25 x 38mm.Average lead time: 1 to 6 daysFrom £12.67
Average lead time: 1 to 6 days
Osmium TetroxideOsmium Tetroxide, OsO4, is a useful chemical compound that finds application as a staining and fixing agent for use in electron microscopy.Average lead time: 1 to 52 daysFrom £50.20
Average lead time: 1 to 52 days
Epoxy ResinsEpoxy resins for the preparation and sectioning of specimens for TEM.Average lead time: 1 to 22 daysFrom £8.83
Average lead time: 1 to 22 days
Average lead time: 1 to 13 days
BuffersSome buffers are toxic and should be handled with the same care as fixatives.Average lead time: 1 to 22 daysFrom £27.72
Average lead time: 1 to 22 days
Antifadent (AF) solutionsPhosphate buffered saline solution containing antifadent, specially prepared for use with UVM 3 solution where fluorochrome fading is a problem.Average lead time: 22 daysFrom £8.94
Average lead time: 22 days
Quantifoil S7/2 holey carbon films - SquareSquare hole, size 7 x 7µm, bar width 2µm.Average lead time: 132 to 172 daysFrom £95.16
Average lead time: 132 to 172 days
Quantifoil R1.2/1.3 holey carbon films - CircularCircular hole, size 1.2µm dia, separation 1.3µm, pitch 2.5µm.Average lead time: 1 to 192 daysFrom £108.49
Average lead time: 1 to 192 days
SEM Stub GrippersThese scissor-shaped grippers are useful for handling SEM specimen stubs.Average lead time: 1 to 37 daysFrom £9.50
Average lead time: 1 to 37 days
Diamond Scriber, fine pointA diamond scriber with a very fine point.Average lead time: 1 to 20 daysFrom £40.81
Average lead time: 1 to 20 days
Fine Scalpel HandlesAn alternative handle has been designed to allow easier blade fitting and removal.Average lead time: 1 dayFrom £38.24
Average lead time: 1 day
