Presslam 1.1 - Advanced Automatic Mounting Press
The Presslam 1.1 advanced automatic programmable Mounting Press is a innovative design producing a total cycle time as low as 5 minutes.
ORDER ONLINE - no minimum order value
AGENTS & DISTRIBUTORS - available worldwide
REQUEST QUOTES - fast online pricing
All prices exclude VAT.
Product DescriptionFeatures & SpecificationsDelivery & Returns
The Presslam 1.1 Advanced Automatic Mounting Press is a distinctly upgraded and innovative design which exhibits several new and improved features. Equipped with an exclusive heating and cooling system, it has a total cycle time of 5 minutes if the preheating element is in operation. The preheating element keeps the unit at the start temperature for 20 minutes eliminating the need to heat from room temperature to curing temperature each cycle. An audible alert notifies users when cycle is complete.
The Presslam 1.1 Advanced Automatic Mounting Press features a single Touch Screen Keypad (EZ-TSK) for simple user operation. Users can set the temperature, pressure, heating, and cooling parameters from a central screen. The unit has 4 pressure modes allowing users to modify based on the mounting compound or variety of parts being mounted. The unit arrives with preset programs for common compression mounting compounds and is equipped with a USB port for simple saving and loading of customised programs.
A water saving function allows users to conserve water consumption.
Mould assemblies are easily interchanged; it is not necessary to disconnect the air or electrical supply. The unit is capable of double mounting by utilising a spacer. The upper portion of the Presslam 1.1 Advanced Automatic Mounting Press conveniently unscrews for easy cleaning.
A water inlet and outlet are located on the rear panel. The unit and operators are protected by a safety solenoid valve. Located on opposite sides of the unit are panels allowing for convenient access; one for pneumatics and a second for electrical
Key Features:
- Exclusive heating and cooling system with a preheating element reducing total cycle time to 5 minutes
- Audible alert when cycle is complete
- EZ-TSK Touch screen Keypad with centralised programming of temperature, pressure, heating, and cooling parameters
- Water conserving program (up to 25%)
- USB port to save & load programs
- Removable top portion for easy cleaning
- Safety solenoid valve
- Separate pneumatic and electrical systems for easy maintenance
Book a Demo!
We can arrange personal demonstrations of this equipment in our dedicated demonstration lab at Stansted, or at you own premises. Click here to find out more >>
Capacity
25.4 to 50mm Ø
Heating system
4 x 600W around mould
Temperature range
20 to 200°C
Heating cycle
0 to 30 min
Cooling cycle
0 to 30 min
Pressure
0 to 1,600 daN
Double mounting
Yes - all diameters
Program back-up
300 with USB connection
Pressurisation modes
4 different modes
Chamber closing
Half turned cover with a safety chamber
Mould changing
Quick, without connectors - electric or hydraulic
Pre-heating mode
Yes (cleared after 6 min without manipulation)
Water saving
Yes (up to 25%)
Voltage
230 V - 50 Hz single-phase
Pneumatic feed
6 to 10 bars
Dimensions (W x H x D)
250 x 680 x 470mm
Weight
72kg (depending on mould size)
Related Products
