Agar Scientific offers a wide range of consumables for resin embedding of specimens for TEM. These include an extensive range of mould shapes and sizes, available for pyramid or flat embedding methods, including Micro moulds, Easy moulds along with a variety of dishes. For added convenience the embedding in one of the many pre shaped BEEM capsules ensures minimal trimming prior to sectioning. Our range of flat silicone rubber embedding moulds with numbered cavities is ideal where orientation of the specimen is crucial. The moulds are very flexible, aiding release of polymerised blocks.
Gelatin Capsule HoldersHolders for size 00, 0, 1 and 4 gelatine capsules.Average lead time: 27 to 29 daysPOA
Average lead time: 27 to 29 days- KonductoMet, 450g AGB8788KonductoMet® is a conductive thermosetting phenolic compression mounting resin with low electrical resistance.In Stock
POA
In Stock 
Metal Mounting Clips, pack of 100 AGB8837Metal clips ideal for holding thin samples during cross-sectioning.In StockPOA
In Stock
FIB SEM mould for biological specimens AGG3504This silicone rubber mould has been developed in collaboration with Cancer Research UK's London laboratories.Average lead time: 29 daysPOA
Average lead time: 29 days
Hot Vac mini vacuum desiccator AGG3519An inexpensive, miniature vacuum desiccator to warm embedding plastics while removing gas bubbles.Average lead time: 44 daysPOA
Average lead time: 44 days
Giammara-Hanker Cast-A-Slide translucent mould AGG3524This silicone rubber mould produces two slides.Average lead time: 13 daysPOA
Average lead time: 13 days- BEEM flat embedding mould AGG3654This transparent polyethylene re-usable mould with 12 numbered cavities provides smooth, flat, polished blocks. Special prices valid while stocks last.In Stock
POA
In Stock 
Polypropylene capsule chambers AGG3679This polypropylene, transparent capsule chamber with hinged, snap cap closure is useful for flat embedding.Average lead time: 20 daysPOA
Average lead time: 20 days
Moulding powdersA range of moulding powders is available that was developed specifically for use in hot mounting processes.Average lead time: 13 to 20 daysPOA
Average lead time: 13 to 20 days
Compression Mounting CompoundsA range of thermosetting compression mounting compounds for hot compression mounting.Average lead time: 13 to 29 daysPOA
Average lead time: 13 to 29 days
SamplKwickSamplKwick® is a semi-transparent, high viscosity rapid curing acrylic cold mounting compound.Average lead time: 13 to 59 daysPOA
Average lead time: 13 to 59 days
VariDur 10VariDur 10 is a high hardness, high viscosity, semi-transparent, acrylic cold mounting compound with superior abrasion resistance and edge retention.Average lead time: 13 daysPOA
Average lead time: 13 days
EpoFix ResinA low viscosity epoxy cold mounting system curing at room temperature.Average lead time: 1 to 27 daysPOA
Average lead time: 1 to 27 days
Demotec 70Demotec 70 is a conductive two component resin based on methyl methacrylate and electrically conductive carbon.Average lead time: 1 dayPOA
Average lead time: 1 day
Silicone Rubber MouldsReusable moulds for cold embedding, made from sturdy, flexible white or blue silicone which does not deform over time.Average lead time: 1 to 13 daysPOA
Average lead time: 1 to 13 days
Two part plastic embedding moulds2-part plastic embedding moulds, 1in (25.4.mm), 1 1/4in (32mm) and 1 1/2in (38mm) diameters.Average lead time: 1 to 13 daysPOA
Average lead time: 1 to 13 days- Gelatine CapsulesPure gelatin capsules, providing a convenient and economical means of producing resin blocks for sectioning. Special prices valid while stocks last.Average lead time: 1 to 27 days
POA
Average lead time: 1 to 27 days - Polyethylene CupsA range of polyethylene cups, originally intended as stoppers, suitable for use as disposable flat embedding moulds.Average lead time: 13 days
POA
Average lead time: 13 days 
Tri-Pour beakersPolypropylene Tri-Pour® Beakers graduated in 10ml increments.Average lead time: 1 dayPOA
Average lead time: 1 day- Tight fitting caps for Tri-Pour beakersTight fitting caps for Tri-Pour beakers. Special prices valid while stocks last.Average lead time: 1 to 44 days
POA
Average lead time: 1 to 44 days 
MicromouldsSelf-supporting strips of 10 size 00 (8mm dia) numbered embedding moulds.Average lead time: 27 daysPOA
Average lead time: 27 days
Flat Embedding MouldsFDA grade silicone rubber flat embedding moulds with a choice of cavities.Average lead time: 1 to 13 daysPOA
Average lead time: 1 to 13 days
BEEM CapsulesThese are pre-shaped polyethylene moulds with hinged lids.Average lead time: 1 to 27 daysPOA
Average lead time: 1 to 27 days
Aluminium DishesDisposable aluminium resin embedding dishes with finger grip handle.Average lead time: 1 dayPOA
Average lead time: 1 day
