Mounting Tabs & Adhesives

This electrically conductive adhesive sheet is suitable for cutting to SEM sample sizes.

Electrodag® 502 consists of specially processed carbon particles in a fluoroelastomer resin system.

A temperature sensitive adhesive which may be applied to a heated stub to yield a sticky surface for holding specimens. 15g. 

Kapton® is a polyimide tape with a silicone adhesive backing which adheres well to difficult surfaces

Fast drying, ultrathin clear adhesive suitable for mounting small particles which can be submerged in other adhesives. Special prices valid while stocks last. 

Wafer-Mount 559 and Wafer-Mount 562 wafer-mount adhesives sheets. Special prices valid while stocks last. 

WACKER Silicone Paste.

Thermoplastic wax ideal for fixing ceramics, glasses and semiconductor materials to specimen mounts for grinding, dimpling or ion beam thinning.

This is a 0.03mm thick polyimide film with silicone backing adhesive.

Copper tape, 12mm wide, with an electrically conductive adhesive.

Highly conductive, copper based spray suitable for shielding against electromagnetic interference, as well as to protect against electrostatic discharge. Special prices valid while stocks last. 

Dry film graphite spray lubricant containing finely divided graphite. 200ml. 

This tape is electrically conductive through pressure sensitive acrylic adhesives.

PELCO® paste containing silver flakes (20 µm) in an inorganic silicate aqueous solution has good thermal and electrical conductivity.

Aerosol spray which can be applied to non-conducting specimens, enabling them to be examined uncoated at low resolution in the SEM.

Fibre tip pen dispensing an all purpose glue, useful for mounting particulate samples on SEM stubs.

EPO-TEK® 353ND is a two component, high temperature epoxy originally designed for semiconductor, fibre optic and medical applications.

EPO-TEK® H20E is a two component, silver filled, epoxy system consisting of a silver resin paste and a silver resin hardener.

QuickStick is a temporary mounting wax, with a melting point of 135°C, used to bond samples during processing.

Double sided adhesive tapes for general use in the laboratory.

Matt adhesive tape which becomes transparent when affixed.