Agar Scientific offers a comprehensive range of chemicals and accessories for processing and staining of biological specimens. Processing Cassettes are available for tissue processing with a selection of Paraffin waxes with varying polymer content and melting points.
- Transport Tubes with Security CapsTransport tubes available in 5ml or 10ml.Average lead time: 1 to 12 days
POA
Average lead time: 1 to 12 days 
Tamper Evident MicrotubesTamper evident microtubes available in five different colours.Average lead time: 12 daysPOA
Average lead time: 12 days
Blackline Microtubes and Storage boxesCompletely opaque tubes and boxes ideal for the storage of photo sensitive solutions.Average lead time: 12 daysPOA
Average lead time: 12 days
5ml Preparation Tubes Conical5ml conical tubes ideal for solution preparation, both biological and chemical.Average lead time: 12 daysPOA
Average lead time: 12 days- 1.5ml Conical Microtubes1.5ml conical microtubes are available in nine different colours. Special prices valid while stocks last.Average lead time: 1 to 12 days
POA
Average lead time: 1 to 12 days - Microcentrifuge TubesTransparent polypropylene, 1.5ml microcentrifuge tubes with 0.5ml graduations. Special prices valid while stocks last.Average lead time: 1 to 19 days
POA
Average lead time: 1 to 19 days 
Aclar FilmACLAR® is a transparent thermoplastic film which cells readily adhere to for fixation, dehydrating and embedding.Average lead time: 1 to 12 daysPOA
Average lead time: 1 to 12 days- Processing CassettesThese are moulded plastic units for processing and embedding. Special prices valid while stocks last.Average lead time: 1 to 26 days
POA
Average lead time: 1 to 26 days 
Average lead time: 5 to 12 days- Snap-Fit Gelatin CapsulesSnap-Fit® gelatin capsules, useful for embedding specimens and storage of small items.Average lead time: 12 days
POA
Average lead time: 12 days 
BEEM CapsulesThese are pre-shaped polyethylene moulds with hinged lids.Average lead time: 1 to 26 daysPOA
Average lead time: 1 to 26 days- Tight fitting caps for Tri-Pour beakersTight fitting caps for Tri-Pour beakers. Special prices valid while stocks last.Average lead time: 1 to 43 days
POA
Average lead time: 1 to 43 days 
Tri-Pour beakersPolypropylene Tri-Pour® Beakers graduated in 10ml increments.Average lead time: 1 dayPOA
Average lead time: 1 day- Polyethylene CupsA range of polyethylene cups, originally intended as stoppers, suitable for use as disposable flat embedding moulds.Average lead time: 12 days
POA
Average lead time: 12 days - Gelatine CapsulesPure gelatin capsules, providing a convenient and economical means of producing resin blocks for sectioning. Special prices valid while stocks last.Average lead time: 1 to 26 days
POA
Average lead time: 1 to 26 days 
Microwave Polymerisation Tray AGL4504This tray can be used with the capsule (AGG3508A) and centrifuge holders (AGG3509).Average lead time: 12 daysPOA
Average lead time: 12 days
Tissue capture pen AGL4370Tissue capture pen for use with frozen or paraffin sections, stable up to 110°C.Average lead time: 12 daysPOA
Average lead time: 12 days
Average lead time: 12 days
Polyethylene mincing dishes, Pack of 100 AGG3918100mm diameter dishes for trimming, cutting and specimen preparation.Average lead time: 12 daysPOA
Average lead time: 12 days
Polypropylene capsule chambers AGG3679This polypropylene, transparent capsule chamber with hinged, snap cap closure is useful for flat embedding.Average lead time: 19 daysPOA
Average lead time: 19 days
Flat Bottomed Capsules AGG3547These Polyethylene flat bottomed capsules are suitable for processing specimens in microwave systems.Average lead time: 19 daysPOA
Average lead time: 19 days
Giammara-Hanker Cast-A-Slide translucent mould AGG3524This silicone rubber mould produces two slides.Average lead time: 12 daysPOA
Average lead time: 12 days
Microwave Holder for Microcentrifuge Tubes AGG3509This holder made from Teflon® is designed to hold up to 18 conventional polyethylene microcentrifuge tubes.Average lead time: 12 daysPOA
Average lead time: 12 days
Microwave Capsule Holder with Lid AGG3508AThis holder made from microwave transparent Teflon® holds up to 24 size 00 capsules, either flat bottomed or standard BEEM®.Average lead time: 19 daysPOA
Average lead time: 19 days
