Accessories for PELCO Precision Low Speed Saw
Accessories for use with the PELCO Precision Low Speed Saw.
Contact your local distributor for quick delivery
ORDER ONLINE - quick & easy
AGENTS & DISTRIBUTORS - available worldwide
REQUEST QUOTES - fast online pricing
All prices exclude VAT.
Product Description
Delivery & Returns
Accessories | |
 | AG75001 Single-Axis Goniometer The Single-Axis Goniometer has a graduated scale with a 0.2° vernier and can be rotated 360°. This rotational capability makes it ideal for precisely slicing single crystals. The sample is mounted to a block using a low melting point wax and the block is subsequently clamped into the PELCO Precision Low Speed Saw. Wax mounting of the sample ensures that the cut piece will remain attached to the holder and will not be damaged due to falling after being cut. |
 | AG75005 2-Axis Goniometer The 2-Axis Goniometer is used for orienting and cutting single crystals. With the sample mounted to the goniometer, the vertical axis can be rotated +/- 50° from the 0.2° vernier on the arm. |
 | AG75003 Double Clamp Sample Holder The Double Clamp Sample Holder is designed to clamp both ends of a round or rectangular rod while cutting between the two clamped positions. The Double Clamp Sample Holder can also be used as a single clamp holder to hold encapsulated metallurgical samples up to 1.25" in diameter. |
 | AG75004 Petrographic Vacuum Sample Holder The Petrographic Vacuum Sample Holder is designed to use a vacuum to hold a 2.5 x 5.0cm (1 x 2") glass slide, onto which petrographic or other samples are mounted, while making saw cuts parallel to the glass slide. The glass slide is held against a stainless steel support plate with vacuum and is placed firmly against three locating pins to maintain its position. |
 | AG75006 Vice Sample Holder The Vice Sample Holder is designed to hold flat, round and irregularly shaped samples without the need for mounting wax. The entire vice can rotate 360° in the horizontal plane. An extended v-notch jaw enables the mounting of cylindrical samples up to 1.25" in diameter including encapsulated metallurgical samples. |
 | AG75019 Freeform Sample Holder, "Bone Chuck" The "Bone Chuck" allows you to hold the sample utilising a series of ten independently adjustable mounting screws. These mounting screws make it possible to hold irregularly shaped specimens and rotate them 360° in a horizontal plane. The Bone Chuck attaches to the standard work arm in place of the standard sample holders. |
Optional Accessories | |
 | AG75053 Aluminum Sample Mount, 1 x 3 x 0.25 inch |
| AG75054 Graphite Sample Mount, 0.87 x 2.5 x 0.125 inch | |
 | AG75032 Cutting Load Weight, 100g |
| AG75033 Cutting Load Weight, 200g | |
 | AG75036 Blade Supports, Pair, 1.37 inch diameter |
 | AG75035 Blade Supports, Pair, 1.87 inch diameter |
 | AG75034 Blade Supports, Pair, 2.43 inch diameter |
 | AG75039 Blade Spacer, 0.125 inch |
| AG75038 Blade Spacer, 0.75 inch | |
 | AG75037 Blade Spacer, 1 inch |
| AG75041 Inch Micrometer Assembly | |
Related Products
More Instrumentation
Adam Equipment Balances & ScalesCell Manipulation InstrumentationDiamond Saws & CuttingDry IceFibre Optic IlluminatorsFlowmetersFume CabinetsGlow Discharge UnitsGrinders, Polishers & PressesHotplates & StirrersIncubators & OvensKnifemakersLam Plan - Sample PreparationLiquid Nitrogen DewarsMagnetic Field CancellingMicroscopesMicrowave ProcessorsNanoparticle DepositionOhaus Analytical & Precision BalancesPelco EquipmentpH MeasurementPlatform RockersServicing & RepairTissue Slicers & EmbeddingUltrasonic CleanersVacuum CoatersWater ChillersWELL - Diamond Wire Saws