TEM grid holders with short posts of standard 3.2mm diameter. The short post TEM grid/sample holder has workstations for two TEM grids and with either one or two sample pucks. The stainless steel holders are very slightly magnetic. Non-magnetic versions of each of these holders are also available.
The pivoting TEM grid holder has workstations for two TEM grids and allows manual adjustment of the grid holder plate to obtain the optimal milling incidence angle, even when at the FIB stage tilt limit. The TEM plate angle is manipulated in situ, using the tip of an empty AutoProbe™ 300 gripper shaft. The pivoting grid holder is non-magnetic.
- Atom probe preparation coupons. Box of 20 AGJ442These copper coupons have been designed to facilitate the preparation of atom probe samples using the Omniprobe's 45° Short-Cut™ tool.Average lead time: 24 days
POA
Average lead time: 24 days - TEM grid/sample holders - long postTEM grid holders with short posts of standard 3.2mm diameter are available.Average lead time: 22 days
POA
Average lead time: 22 days