Accessories for use with the PELCO Precision Low Speed Saw.
All prices exclude VAT.
Description
Product Description
Accessories
AG75001 Single-Axis Goniometer
The Single-Axis Goniometer has a graduated scale with a 0.2° vernier and can be rotated 360°. This rotational capability makes it ideal for precisely slicing single crystals. The sample is mounted to a block using a low melting point wax and the block is subsequently clamped into the PELCO Precision Low Speed Saw. Wax mounting of the sample ensures that the cut piece will remain attached to the holder and will not be damaged due to falling after being cut.
AG75005 2-Axis Goniometer
The 2-Axis Goniometer is used for orienting and cutting single crystals. With the sample mounted to the goniometer, the vertical axis can be rotated +/- 50° from the 0.2° vernier on the arm.
AG75003 Double Clamp Sample Holder
The Double Clamp Sample Holder is designed to clamp both ends of a round or rectangular rod while cutting between the two clamped positions. The Double Clamp Sample Holder can also be used as a single clamp holder to hold encapsulated metallurgical samples up to 1.25" in diameter.
AG75004 Petrographic Vacuum Sample Holder
The Petrographic Vacuum Sample Holder is designed to use a vacuum to hold a 2.5 x 5.0cm (1 x 2") glass slide, onto which petrographic or other samples are mounted, while making saw cuts parallel to the glass slide. The glass slide is held against a stainless steel support plate with vacuum and is placed firmly against three locating pins to maintain its position.
AG75006 Vice Sample Holder
The Vice Sample Holder is designed to hold flat, round and irregularly shaped samples without the need for mounting wax. The entire vice can rotate 360° in the horizontal plane. An extended v-notch jaw enables the mounting of cylindrical samples up to 1.25" in diameter including encapsulated metallurgical samples.
AG75019 Freeform Sample Holder, "Bone Chuck"
The "Bone Chuck" allows you to hold the sample utilising a series of ten independently adjustable mounting screws. These mounting screws make it possible to hold irregularly shaped specimens and rotate them 360° in a horizontal plane. The Bone Chuck attaches to the standard work arm in place of the standard sample holders.
Optional Accessories
AG75053 Aluminum Sample Mount, 1 x 3 x 0.25 inch
AG75054 Graphite Sample Mount, 0.87 x 2.5 x 0.125 inch
AG75032 Cutting Load Weight, 100g
AG75033 Cutting Load Weight, 200g
AG75036 Blade Supports, Pair, 1.37 inch diameter
AG75035 Blade Supports, Pair, 1.87 inch diameter
AG75034 Blade Supports, Pair, 2.43 inch diameter
AG75039 Blade Spacer, 0.125 inch
AG75038 Blade Spacer, 0.75 inch
AG75037 Blade Spacer, 1 inch
AG75041 Inch Micrometer Assembly
Delivery & Returns
LEAD TIMES: Average Lead Times are shown individually in days for any products not currently in stock. Whilst we are working closely with our suppliers to minimise the impact of global supply chain issues, and regularly update our product prices and lead times, some are subject to change due to supply chain fluctuations.
Delivery is calculated at the checkout, please see our delivery and returns page for more information.
PRICE & AVAILABILITY: Please note that while we are working closely with our suppliers to minimise any global supply chain issues, prices and availability may be subject to change at short notice.