Default Category

Instrumentation Tweezers & Tools SEM TEM LM AFM & SPM FIB General Consumables Cryo-EM Calibre Scientific Special Offers New Products

High Precision Pin Vise Handle and Precision Ground Diamond Scribes
High precision pin vise handle machined from the finest materials.
Average lead time: 27 days
From £25.91
Average lead time: 27 days
EPO-TEK H70E Epoxy AG16017
EPO-TEK® H70E Thermally Conductive Epoxy.
Average lead time: 27 days
£139.91
Average lead time: 27 days

Down

Up
Copper foil on aluminium grid AGS149
This dual-purpose specimen determines detector efficiency, generating two well separated K lines to check the calibration of the X-ray detector.
Call for leadtime
£32.20
Call for leadtime

Down

Up
Tantalum Apertures
Tantalum final apertures are for SEM use where X-ray analysis of biological material is being undertaken.
Average lead time: 67 days
From £70.04
Average lead time: 67 days
Stainless Steel Discs
These stainless steel discs have etched holes and are mainly used for gas flow control, pressure testing and filtering of particles.
Average lead time: 4 days
From £339.66
Average lead time: 4 days
Spray apertures, 12.68 x 0.25mm, Molybdenum
12.68mm dia, 0.25mm thick. Profile A. Used in Cambridge/LEO/Zeiss and Camscan scanning electron microscopes.
Average lead time: 67 days
From £125.21
Average lead time: 67 days
Apertures with square holes - 2mm dia, 0.6mm thick
Apertures with square holes manufactured from platinum.
Average lead time: 42 days
POA
Average lead time: 42 days
Apertures with square holes - 3.04mm dia, 0.25mm thick
Apertures with square holes manufactured from platinum.
Average lead time: 67 days
From £375.81
Average lead time: 67 days
NEW
Cryo-Aprons
Cryo-Aprons offer protection from splashes and ultra-cold applications.
Average lead time: 4 to 11 days
From £290.40
Average lead time: 4 to 11 days
AFM Disc Gripper
This AFM disc gripper has been specially designed with rubber coated tips for picking up discs from a flat surface.
Average lead time: 1 to 42 days
From £15.62
Average lead time: 1 to 42 days
Sable hair brushes
Sable hair brushes for delicate manoeuvring of specimens and grids.
Average lead time: 1 day
From £29.88
Average lead time: 1 day
Acheson Silver DAG 1415M
The genuine replacement for DAG 915, used widely in electron microscopy and electronic circuitry for capacitor terminations, electrostatic screening, coating of UHF reflectors and electroplating on non-conductors.
Average lead time: 1 day
From £16.44
Average lead time: 1 day
Storage racks, metal
Metal cabinets with plastic drawers.
Average lead time: 11 days
From £107.17
Average lead time: 11 days
Insect Pins
Insect pins: 0.2 x 12mm, 0.1 x 12mm, 0.25 x 38mm.
Average lead time: 1 to 11 days
From £12.67
Average lead time: 1 to 11 days
Osmium Tetroxide
Osmium Tetroxide, OsO4, is a useful chemical compound that finds application as a staining and fixing agent for use in electron microscopy.
Average lead time: 1 to 57 days
From £50.20
Average lead time: 1 to 57 days
Epoxy Resins
Epoxy resins for the preparation and sectioning of specimens for TEM.
Average lead time: 1 to 27 days
From £8.83
Average lead time: 1 to 27 days
Hardeners for Epoxy Resins
Hardeners for epoxy resins
Average lead time: 1 to 18 days
From £14.09
Average lead time: 1 to 18 days
Buffers
Some buffers are toxic and should be handled with the same care as fixatives.
Average lead time: 1 to 27 days
From £27.72
Average lead time: 1 to 27 days
Antifadent (AF) solutions
Phosphate buffered saline solution containing antifadent, specially prepared for use with UVM 3 solution where fluorochrome fading is a problem.
Average lead time: 4 to 27 days
From £8.94
Average lead time: 4 to 27 days
Quantifoil S7/2 holey carbon films - Square
Square hole, size 7 x 7µm, bar width 2µm.
Average lead time: 1 to 177 days
From £95.16
Average lead time: 1 to 177 days
Quantifoil R1.2/1.3 holey carbon films - Circular
Circular hole, size 1.2µm dia, separation 1.3µm, pitch 2.5µm.
Average lead time: 1 to 197 days
From £108.49
Average lead time: 1 to 197 days
SEM Stub Grippers
These scissor-shaped grippers are useful for handling SEM specimen stubs.
Average lead time: 1 to 42 days
From £9.50
Average lead time: 1 to 42 days
Diamond Scriber, fine point
A diamond scriber with a very fine point.
Average lead time: 1 to 25 days
From £40.81
Average lead time: 1 to 25 days
Fine Scalpel Handles
An alternative handle has been designed to allow easier blade fitting and removal.
Average lead time: 1 day
From £38.24
Average lead time: 1 day